Position your work area between windows or between a window and open doorway. You should also set up a box fan or two to blow air away from you. A room that has an exhaust fan works well, too.
Make sure you are also following the directions on the acrylic cement closely to avoid any mishaps.
If you notice any rough areas, use a router (a power tool with a shaped cutter) or light sandpaper to ensure that the edges are perfectly smooth and square. However, do not sand the edges so that they become round. Make sure that any surfaces being bonded together are lightly sanded and not shiny, as a very smooth surface is tough to bond together.
Be sure that your surfaces are totally dust-free – this is really important to the process.
Once filled, squeeze the bottle gently to allow some of the air inside to escape.
Always do a dry run first, making sure the pieces fit before applying any glue. It helps to assemble the object together with adhesive tape. Then the adhesive can be placed accurately without juggling the parts.
Try to lightly squeeze the bottle and move it without stopping, this will ensure you don’t over-glue the acrylic. If you are gluing for a box corner joint, apply the acrylic cement to the inside edge of the sheeting. However, if you are gluing for flat joints, apply the cement to both sides of the sheeting. [4] X Research source Do not allow the acrylic cement to touch any piece of the acrylic you do not want to be glued. Acrylic cement will permanently damage any surface it touches. If you do drip acrylic cement onto the acrylic, allow the cement to evaporate. Do not wipe it off.
If the pieces have been adhered well, the dried acrylic cement will be clear. Before this time, the acrylic should appear as a cloudy white.
